Manufacturer : Packo Inov NV Type: Cryofreezer / Batch freezer Year of manufacture : 2011 Total volume : 950 L Dimensions : 150 x 120 x 230 cm Supply voltage 3x400V + N – 50Hz Minimum temperature set point: – 120°C Weight : 600 Kg Materials: 304 L stainless steel Full technical file: available in digital version Refrigerant :
Manufacturer : Memmert Model: B 30 Type : universal oven / incubator Maximum temperature : 70°C Power : 800 W Total volume : 48 L Inside dimensions : 380 x 300 x 380 mm
Manufacturer: Thermo fisher scientific Model: TSX50086V Type: Ultra low temperature freezer Year: 2019 Volume: 682 L Minimum temperature : – 86°C Inside dimensions : 73 x 71,9 x 130 cm Outside dimensions : 86,4 x 95,5 x 198,1 cm Weight : 316 Kg
Manufacturer: Eratis Model: ICH 600 T Year : 2010 Type : climatic chamber Cooling unit – refrigerant : R134A Power : 1,5 KW Useful volume : 600 L ( 65 x 65 x 140 cm) Temperature : +15°C to 55°C
Manufacturer : Confitrac sprl Model: CDS-161205 Year : 2017 Type: Deodoriser Condition: new, never used. Document : CDS-P&ID-Deo-500-Electrique.pdf Installation consisting of : – A horizontal cylindrical shallow bed deodoriser divided into two horizontal compartments, supported by two supports and offering the possibility to treat either 250 kg in one compartment or 500 kg in two compartments. – A horizontal buffer
Documents installation-drawing.pdf Technical information Physico-chemical separation / distillation unit. Year: 2015 Installation ATEX 3G IIBT4, inside the installation: zone 1G Operating mode: continuous – batch – semi-batch. Pressure: Vacuum – 3 barg max Boiler size: 50 Litres (Possible 200 Litres) Flow rates: Approximately 180 Kg/hr feeding a water/ethanol mixture (90/10) at atmospheric pressure with a reflux rate of 5. Theoretical
Heraeus Vötsch Climatic chamber VTRK 500. Inner dimensions 745 x 880 x 765mm. Capacity 500L. Door with porthole 350 x 350 / wipers Temperature 10-90°C. Fridge unit in the lower part, under the enclosure Space for storage tank approx. 10l of distilled water. Electrical power 3.1 kW / mono 220 V Overall dimensions: 1100 X 1400 X 2100
Previous use: distilled water Capacity: 100 L/H Material: glass Year: 1993 The unit includes : Level regulator Electrical control box Frame Pump Coil heat exchanger (1.2 bar max) Electric tank heater 5000W 200 litre glass tank Tubular exchanger (1.2 bar max) Photoelectric level Boiling chamber Stainless steel coil boiler: stainless steel 316 (1.2/1.5 bar max)
Manufacturer : ATLAS / AMETEK Model: CI4000 Xenon Weather-Ometer Year : – Type: Laboratory weathering chamber via simulation of environmental constraints. Use: laboratory ageing instrument to predict the lifetime of materials / products. (= acceleration of ageing). Documentation : 133_mmcg_ci4000.pdf Rotating sample rack . Water-cooled xenon arc lamp system, 6,500 W. Front and rear spraying of samples. Direct settings and control:
Manufacturer: BINDER BINDER Model: KBF LQC 240 Year: 2020 Type: Model KBF LQC 240 | Constant climate chambers with ICH-compliant light source and light dose control. Application: For photostability tests. Two 3D spherical sensors control the light dose from UV-A and visible light. The KBF LQC range is specially developed to perform tests under constant temperature, humidity and lighting conditions
Manufacturer: SPAME (France étuve) Model: AU350 Type : oven Application : drying / heat treatment Maximum temperature : 200°C Power : 4 KW Useful volume : 350 L Internal dimensions : 70 x 50 x 100 cm Overall dimensions : 90 x 70 x 125 cm Weight : 120 KG Number of plates / grids: 2
Documentation Technical_drawing.pdf General specifications Interior dimensions 2000 x 2500 x 2500mm (W x H x D) External dimensions 3,040 x 4,365 x 3,085 mm (W x H x D) Monobloc construction Finished weight: 4263.25 kg Performance Max temperature 150°C on air Heating Electrical energy Total heating power 72kW / thyristors Number of control zones 1 Construction Frame: Welded steel sections
Osertech is specialised in the trading of used industrial equipment. Since 1994, the company offers services in buying and selling equipment and machinery in France and worldwide.